Parts

The Flash I is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Double bushing spindle, 52.5mm - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included

There’s no need to choose between clipless performance and platform versatility with iSSi's Flip II pedals. Go clipless on the commute or sport clogs on campus. - Flip II: 56.5mm spindle length - Wear 2-bolt style cycling shoes or casual flat shoes - Compatible with iSSi, Shimano SPD, and Wellgo 98A cleats - Chromoly spindle, ED-coated - Standard 15mm wrench flats as well as 8mm hex broach - Black chrome hardware - Adjustable spring tension - 4° cleat float - 14.6° angle of release - Bushing/sealed bearing combination for low-maintenance durability - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch

The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install

The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details

The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 158g

Replacement spacer pack for Wheels Mfg. 24mm (Shimano) bottom brackets. Bearings sold separately. Pack Includes: - (2) - Silicone Dust Seal, 24mm ID - (2) - 0.5mm, 24mm ID Crank Spindle Spacer - (2) - 1.0mm, 24mm ID Crank Spindle Spacer

Replacement spacer pack for Wheels Mfg. 30mm spindle bottom brackets. Bearings sold separately. Pack Includes: - (2) - Silicone Dust Seal, 30mm ID - (2) - 0.5mm, 24mm ID Crank Spindle Spacer - (2) - 1.0mm, 24mm ID Crank Spindle Spacer

- Plastic nylon molded body - Chromoly spindle - 318g pair

- Nylon clips - Woven straps - For ATB or hybrid use

- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams

• Forged aluminum • Integrated micro-adjust seat clamp

•Mountain and road touring cantilever design •Forged aluminum construction •Linear spring with quick tool adjust •185g each

• Aluminum head • Stainless-steel 180mm-tall shaft • 1-inch model has 22.2mm quill, 15/16-inch model has 21.1mm quill • Single-bolt clamp

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Forged alloy construction •3 finger •Pulls two brake cables with one lever •136g each

• Side pull design • Includes lever, caliper, cable and housing • Aluminum construction • 330 grams/set

- Horizontal square interface - Only includes left crank

- Replacement link wire for cantilever brakes

A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.

- Deluxe gel cushion cover - Non-slip bottom - Locking drawstring - Dimensions: 12 x 13 inches

- With plastic washers - Shell: 8mm Allen head axle bolt

• Ergonomic shape • Soft Kraton Rubber material • 7/8" • 110mm

• 6 x 10-1/4" • Quilted top • Padded

• Aluminum clamp • Built-in rear rack mount

- Steel body - Steel cups - Chromoly spindle - Sealed bearings - Interface: English - Square Taper JIS - Weight: 305-320 grams

- Chrome allen seat binder bolt

- Binder bolt - M6 x 45mm chromoly bolt - 13mm CNC alloy nut - Length: 45mm

• Easy-on, easy-off • Available in two chain widths and two colors • Available in six teeth sizes

• Steel • Retainer ball bearings, includes top cap and star nut • 1 1/8 inch • S.H.I.S.: EC34/28.6, EC34/30

- Fits cantilever brakes - Sold individually

- Standard steel replacement